Resources
Home-Application - Telecommunications -IPX3&IPX4 Water Spray and Splash Test Chamber

IPX3&IPX4 Water Spray and Splash Test Chamber

IPX3&IPX4 water spray and splash test chambers have different oscillating tube radius optional: 200 mm, 400 mm, 600 mm, 800 mm, 1000 mm. Larger system with 1200 mm, 1400 mm, and 1600 mm tubes also available.
Model MT-WST
Performance Oscillating tube Radius (mm) 200 mm, 400 mm, 600 mm, 800 mm, 1000 mm
(Larger system available for 1200 mm, 1400 mm, and 1600 mm tubes)
Angle 0 to ±180°
IPX3: 60° from center (120° total)
IPX4: 360° from center (near 360° total)
Speed 60°/seconds
4 sec. for 2 x 120° for IPX3 (Lasting time: 5 mins)
12 sec. for 2 x 360° for IPX4 (Lasting time: 10 mins)
Spray nozzles Diameter Φ0.4
Distance between nozzles Every 50mm
Test distance IPX3&IPX4 200mm
Test time IPX3 4 sec. for 2 x 120° for IPX3 (Lasting time: 5 mins)
IPX4 12 sec. for 2 x 360° for IPX4 (Lasting time: 10 mins)
Watr flow (L/min) Average 0.07± 10 %
Total IPX3: 1.1IPX3: 1.8
IPX4: 1.8IPX4: 2.6
Turntable Height 700mm
Rotating speed 1~3 RPM (± 2 %) adjustable
Diameter 600mm
Load-bearing 50kg max
Construction Material Exterior Stainless Steel-SUS#304
Interior
Control system Controller 7" color touch-screen
Timing range 1~9999 (H.M.S)adjustable
Faciliy Requirement Inlet water Type City tap water
Pressure ≥0.7kgf/cm2
Temperature RT
(The water temperature difference between testing and test specimen ≤ 5K)
Electricity Power suuply 220V 1 phase 50HZ/60HZ
Frequency (Hz) dependant on country/region of installation.
Drain Facility Type Open-type,avoiding waterlogging, please choose suitable drain facility , for example:
1. put outdoors for testing.
2. build glass shower room for testing
Accessories Fuses; Drain-pipe
Safety protection Motor overload;
Short-circuit protection
Leakage protection etc.
Description

IPX3&IPX4 water spray and splash test chambers have different oscillating tube radius optional: 200 mm, 400 mm, 600 mm, 800 mm, 1000 mm. Larger system with 1200 mm, 1400 mm, and 1600 mm tubes also available. It is designed with a welded steel frame, steel panels, all powder coated blue, with adjustable feet.

The specimen is placed at the center of the semicircle formed by the oscillating tube. Water is then sprayed on the specimen at a defined pressure to test any leakage.


Features
Providing different oscillating tube radius according to test specimen type
Completely adjustable tube height system allows moving the tube up/down to quickly establish the maximum 200 mm spacing from the spray nozzles as specified in the standards
Automatically stops tube rotation and water flow at the precise test time
Accurate reading of flow rate by flow gauges
3rd Certificate of calibration available upon request
Call me!