|External dims. (mm)||Width||1550||1550|
|Quantity||4 pcs for 4 angels (0°，30°，60°，90°)|
|Rotating speed||1~5 rpm|
|Test distance||From jet nozzle to the surface of the test unit: 100~150mm|
|Test time||30 seconds in each positions (0°, 30°, 60° & 90°) , totally 120s|
|Watr flow (L/min)||14～16 L / min|
|Water temperature||RT～ 80°/± 5°C|
|Water pressure||80 – 100 bar|
|Construction||Material||Exterior||A3 Steel board with powder coated|
|Interior||Mirror Stainless Steel-SUS#304|
|Viewing window||Tempered glasses|
|Control system||Controller||7" color touch-screen|
|Timing range||1~9999 （H.M.S）adjustable|
|Water circulation system||Water tank: 100L(Could heat the water temperature to 90°C)|
|Water cyclic utilization to save engergy|
|"Facility requriement"||Inlet water||Type||City tap water|
|Electricity||Power suuply||3 phase 50HZ/60HZ|
|Voltage (VAC) and frequency (Hz) dependant on country/region of installation.|
|Safety protection||Motor overload;
Leakage protection etc.
Ipx9k high temperature pressure jet waterproof test chamber is an Ingress Protection rating system test that verifies a product is protected against close-range high pressure, high temperature liquid sprays.
In this construction 4 jet nozzles are provided with solenoid control, change over relays and logic control that is fed with water at a temperature of 80°C water and a pressure of 8–10 Mpa (80–100 bar). The water flows at the flow rate of 14–16 l/min. It should be noted that the nozzles should be held at 10 cm –15 cm from the specimen for 30 seconds at different angles of 0°, 30°, 60° and 90°. It also comes with optional accessories such as a tilting test table placed at the center of the cabinet. The unit under test is fixed on the rotating table for the uniform distribution of water on all sides. An enclosure of Acrylic and Aluminum is also provided on demand.