|Performance||Temperature range||50℃ to 200℃|
|Vacuum degree||＜133 pa|
|Construction||Material||Exterior||Cold-roll steel sheets with static powder coating spraying|
|Specimen holder||Aluminium plate|
|Thermal insulation||Insulated cotton|
|Viewing window||Double-layer explosion-proof and tempered glasses|
|Sealing||Silicone rubber door seal|
|Vacumm system||Deflation valve on the panel and vacuum port in the back|
|Heating way||Every aluminum plates makes effective contact with the heater element, finally to make the test specimen get the most optimized heat transmission. Every aluminlum plate could set temperature different(Total 3 levels.)|
|Control system||Controller||Digital display temperature controller|
|Temperature sensor||PT-100Ω Dry bulb|
|Timing range||0~999 min|
|Control accuracy||± 1 ℃|
|Facility requriement||Electricity supply||220V 50/60HZ 1 phase|
|Operating environment conditions"||+5℃~ +28℃ ≤ 85%RH|
|Safety protection||Over temperature protection;
Explosion proof protection
Vacuum ovens are used for drying sensitive substances that may be damaged by excessive heat, and for applications that require extremely low residual moisture levels. It also can rush into inert gas to the internal, especially of some compound material can also be quickly drying.
Vacuum dry oven is suitable for the universities and colleges, scientific research, factories and mines, under the condition of vacuum to drying, heat treatment. Reduces the drying temperature, avoid some items heating oxidation, clean grain of destruction.
This model is used for routine experiments and tests, and cost effective. It supplied for Health, Medicine, Biology, Agriculture, Research etc. relative institution
And department to make powder drying, sterilization and disinfection of different glass container, heat treatment and heating, but not suitable for volatile, flammable and explosive products.