Resources
Home-Application - Telecommunications -IPX1&IPX2 Drip Box Tester

IPX1&IPX2 Drip Box Tester

IPX1 and IPX2 drip box tester is making test by multiple drip nozzles on the drip tank which is designed on the top of the fixture. Tank height is adjustable.
Model MT-DBT
Performance Drip Water Tank Dripping area (mm) 1000*800
Height (mm) 250
Height to test unit (mm) 200~2000 (adjustable)
Spray nozzles Diameter (mm) Φ0.4
Square grid layout (mm) 20*20
Test time IPX1&IPX2 10mins
Test distance From spray nozzles to test unit surface 200mm
Watr flow (mm/min) IPX1 1 +0.5
IPX2 3 +0.5
Turntable Size 500×400mm(with T-Slot )
Rotating speed 1 RPM (± 2 %)
Angle 0~15°
Weight support 30kg
Operating Mode Continuous rotation
Construction Water tank material Aluminium alloy+acrylic board
Flowmeter type Rotor flow meter
Controller Programble touch screen controller (could set the parameters of turntable, water flow rate, testing time etc.)
Automatic lifting system To control water tank height
Facility requriement Water City tap water
Electricity supply 220V 1 phase 50HZ/60HZ
Frequency (Hz) dependant on country/region of installation.
Accessories Spray nozzles Extra pieces for spare; fuses
Safety protection Motor overload;
Leakage protection etc.
Description

IPX1 and IPX2 drip box tester is making test by multiple drip nozzles on the drip tank which is designed on the top of the fixture. Tank height is adjustable. The flow rate can be controlled through a flow meter and a valve. A pump is used to fill the drip tank, which cuts off automatically after the tank fills up. The unit under test is fixed on the rotating table for the uniform distribution of water on all sides.

IPX1 Dripping water test method
Dripping water (vertically falling drops) shall have no harmful effect. Test duration: 10 minutes, equivalent to 1 mm rainfall per minute.

IPX2 Dripping water when tilted up to 15° test method
Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position. Test duration: 10 minutes, Water equivalent to 3 mm rainfall per minute.

The drip tank of Drip Box Tester for IPX1 and IPX2 Test is made of multiple drip nozzles through which the water flows at the rate of 1mm/min and 3mm/min. In a stainless steel housing a drip tank is placed on over it. The flow rate can be controlled through a flow meter and a valve. A pump is used to fill the drip tank, which cuts off automatically after the tank fills up. The unit under test is fixed on the rotating table for the uniform distribution of water on all sides.


Features
Drop of rain flow: flow meter comes with control valve, manual adjustment
Water tank lifting device to make suitable adjustment for the tank height
Easy replaceable drip nozzles
Water filtering device
Call me!