|
Temperature Range
|
10~100℃
|
|
Temperature Deviation
|
≤±1.0℃
|
|
Temperature repeatability
|
≤±0.5℃
|
|
Temperature uniformity
|
≤2℃
|
|
Humidity Range
|
25%~98%R · H
|
|
Humidity deviation
|
+2~-3% (>75%RH) 土5% (≤75%RH)
|
|
Humidity fluctuation
|
≤1.5%R · H
|
|
Humidity uniformity
|
≤3%R · H
|
|
Salt spray settling volume
|
Use an 80cm2 container to continuously collect the salt deposit solution at any point in the swept area for at least 8 hours.
|
|
Deposition solution up to 1-2ml/h (number of test vessels 3*3)
|
|
Spray Method
|
Pneumatic, continuous and intermittent injector can be adjusted at will
|
|
Air Source Pressure
|
0.17~0.4mPa
|
|
Brine tank volume
|
≥500L
|
|
Internal load bearing
|
≥1000KG/m2
|
|
Test Mode
|
Set value and program test (salt spray and wet heat can be switched automatically)
|
|
Sample placement
|
The bracket allows the assembly to be positioned at a 30-degree Angle from the Y-axis direction
|
|
Salt spray method
|
Baffle type; The salt spray is not sprayed directly onto the sample
|
|
Salt spray interior roof
|
The top angle is about 120 degrees to prevent droplets from dropping directly onto the sample
|
|
Chamber pressure port
|
There are two 110 *110mm automatic control of balance window in the bin for suitable bit-pass installation
|
|
Salt spray testing level
|
1~7 level salt spray testing
|
